Pages

September 03, 2014

03/09/2014: Training in fall-protection directive clarified for feed industry in the USA

NGFA, AAGIWA Issue Joint Statement on the USDA Federal Grain Inspection Service's Fall-Protection Directive

The National Grain and Feed Association (NGFA) and the American Association of Grain Inspection and Weighing Agencies (AAGIWA) today issued a joint statement in an effort to clarify that a recent fall-protection directive "applies only to FGIS employees." 

According to the statement, the US Department of Agriculture's Federal Grain Inspection Service (FGIS) published Directive 9170.14, which provides procedures for identifying rolling stock fall hazards and for conducting a fall-protection feasibility assessment.

However, the directive NGFA and AAGIWA stress "applies only to FGIS employees," and "officially designated agencies are not required to adopt the policy."

Instead, NGFA and AAGIWA state that officially designated agencies "may adopt the policy or use it as a guideline to establish their own policy to comply with federal and state safety and health requirements."

NGFA and AAGIWA also noted that work environments and circumstances vary greatly at grain handling facilities.  The organizations encouraged their members to "establish safety policies and procedures tailored to each individual location to comply with all federal and state safety and health requirements, including those pertaining to rolling stock fall protection."  However, they say, "those policies and procedures may differ from those found in the FGIS directive.

Background

The directive was developed by FGIS in response to citations, issued by the Occupational Safety and Health Administration (OSHA) in 2011, for failing to conduct fall protection assessments, train employees on fall hazards and train supervisors to identify potential hazards.  


Fall protection long has been one of OSHA's emphasis areas.  Yet, the existing regulations under OSHA's walking-working surfaces and personal-protective equipment (fall-protection systems) standard - also known as Subpart D - do not specifically include rolling stock (such as rail cars) and motor vehicles. OSHA defines "rolling stock" as any locomotive, railcar or vehicle operated exclusively on a rail or rails, or a trolley bus operated by electric power supplied from an overhead wire.

Also relevant to this matter, OSHA in 1996 attempted to provide guidance to the grain handling industry on this uncertainty by issuing an internal memorandum - commonly known as the "Miles Memo" - that directed OSHA inspectors not to issue citations for rolling stock under Subpart D.  The memo was OSHA's response to the NGFA's request for clarification of the agency's rolling stock enforcement policy.  Specifically, the OSHA Miles Memo document states, "... falls from rolling stock would not be cited under the fall-protection standard because it was not appropriate to cite exposure to fall hazards from tops of rolling stock unless the stock was inside of or contiguous to a structure where fall protection is feasible."

As a result, the 1996 memorandum allows employers to rely on administrative controls, which include:  1) training; 2) physical evaluation of an employee's ability to work safely atop rail rolling stock; and 3) company procedures to ensure employee safety when working in staging yards and other areas away from the facility's railcar loading point.

###

The NGFA, established in 1896, consists of more than 1050 grain, feed, processing, exporting and other grain-related companies that operate more than 7,000 facilities and handle more than 70 percent of all US grains and oilseeds. Its membership includes grain elevators; feed and feed ingredient manufacturers; biofuels companies; grain and oilseed processors and millers; exporters; livestock and poultry integrators; and associated firms that provide goods and services to the nation's grain, feed and processing industry. The NGFA also consists of 26 affiliated State and Regional Grain and Feed Associations, and has strategic alliances with Pet Food Institute and North American Export Grain Association.
 


Read more HERE.
 

The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine GFMT
which is published by Perendale Publishers Limited.


For additional daily news from milling around the world: global-milling.com

No comments:

Post a Comment