Pages

March 17, 2016

17/03/2016: Wolfson Centre one day course: Dust Explosions – How to Demonstrate DSEAR/ATEX Compliance

http://www.gre.ac.uk/engsci/research/groups/wolfsoncentre/coupro/sc/dust
Do you understand your responsibilities under the DSEAR/ATEX regulations?
If not, your plant may be at risk of a dust explosion.

Explosions and fires from combustible materials are a known hazard and can give rise to serious injury – sometimes even fatality - as well having as the potential to cause extensive plant and buildings damage and substantial loss of production.  

Legislation introduced in 2002 - the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) - rationalised workplace assessment for fire and explosion hazard identification, and methods of prevention or mitigation. DSEAR requires all workplaces where substances that could give rise to fire or explosion are handled or stored must be fully assessed and protected. 

The Wolfson Centre for Bulk Solids Handling Technology are running their popular one day course Dust Explosions – How to Demonstrate DSEAR/ATEX Compliance on 6 April 2016 at their premises in Chatham, Kent.

This course gives an introduction to the subject and the simple measures that can be taken to reduce the hazard of a dust explosion. It includes a brief overview of current legislation and the safety precautions required to demonstrate compliance and provide a safe working environment for employees.

You’ll learn:
  • UK dust explosion statistics  
  • What is an explosion? 
  • Standard explosion tests 
  • Generic vs actual test data 
  • Hazardous area zoning – 20, 21 and 22 
  • Fundamentals of DSEAR risk assessment  
  • Explosion prevention and protection methods
Places are limited so book now - HERE.   
See what other short courses for industry are coming up at the Wolfson Centre HERE
 

The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine GFMT
which is published by Perendale Publishers Limited.


For additional daily news from milling around the world: global-milling.com

No comments:

Post a Comment