Pages

October 11, 2017

11/10/2017: More with less in today’s feed mills

by Julia Born, Evonik, Germany

One of the biggest issues facing feed production today is feed mill capacity


This is particularly true for fully integrated poultry or swine producers, who view the feed mill as a cost center, compared with a traditional feed producer who views the feed mill as a profit center.
 


As such, integrated feed mills are frequently asked to do more with what they have or even with less. This puts tremendous pressure on the managers of these mills to identify ways to de-bottleneck their operation without investing a tremendous amount of capital.

Evonik has recognised this as an area of concern, and likewise an opportunity for us to help many of our customers. As part of our value-added technical services, we have feed mill consulting services, which are available to our customers for help and insight on how to do more with less in today’s feed mills.

One way to increase throughput without significant investment is to minimise the use of liquids in feed. While a certain amount of liquids positively impacts final feed quality by reducing dust and prevention of de-mixing during storage and transport, an excess can increase total mix time (or reduce dry mix time) and reduce homogeneity of mix.

Figure 1 compares the mix time for dry micro-ingredients with the mix time of increasing amounts of liquids added via the same system. If a liquid is added, the mix time for such liquid is clearly shorter than it should be unless total mix time is increased. The addition of a second liquid (here exemplified by doubling the amount from 100 to 200 percent) further decreases the available time for proper mixing.
 

Figure 1
Image credit: Evonik

We were recently able to help a customer gain over 1,500 tonnes per week by switching them from a liquid to a dry methionine source. At the time, the customer was producing 10,285 tonnes per week (2,057 tonnes per day). To produce this amount of feed, the feed mill staff were working three shifts per day, five days a week plus one more shift on a sixth day.

At the request of this customer, we conducted a feed mill performance audit, which revealed opportunities to improve mill performance and reduce mix time with a relatively simple change.

Basically, the audit showed that their feed mill processes were good, but their total mix time was seven minutes per batch, which was limiting the tonnage that this mill could produce. The prolonged mix time was due to the four different liquids (liquid MHA-FA, liquid lysine, choline chloride, and fat) that were being used in the diets produced at this mill. So, it became apparent that any opportunity to reduce total mix time would essentially serve as a means to expand this mill’s capacity and be very beneficial for this customer.

It was concluded from the audit that total mix time could be reduced by 55 seconds by switching this customer from liquid MHA-FA to dry DL-Methionine (DL-Met). In doing so, they would only need to dose three liquids compared with the four that they were currently dosing. This change would increase their capacity by 311 tonnes per day (1,555 tonnes per week) resulting in a total mill capacity of 11,840 tonnes per week (2,368 tonnes per day).


Read the full article, HERE.

Visit the Evonik website, HERE.
 

The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine Milling and Grain
which is published by Perendale Publishers Limited.


For additional daily news from milling around the world: global-milling.com

No comments:

Post a Comment