Pages

July 23, 2020

Extru-Tech introduces a self-adjusting die/knife cutter head

Dramatic reductions in maintenance costs and downtime are just two of the benefits of a new Self-Adjusting Die/Knife Cutter System from Extru-Tech, Inc. Equally important, the new advanced feature cutter head can be used across the full spectrum of wear plates.

According to John Menold, field service manager for Extru-Tech, the new die/knife cutter system offers a cleaner cut than cast blade configurations due to a 'precision' pressure pack and individually replaceable blades, which can be sharpened from three to five times.


 
Extru-Tech's new Self-Adjusting Die/Knife Cutter System
Image credit: Extru-Tech
'Not only can they be re-sharpened, but the new blades have been reported to last from 2 1/2 to 10 times longer than cast blades,' Mr Menold adds. 'This translates into lower overall cost, particularly when you consider the automatic adjustment feature allows one cutter head system to be used on multiple dies. The cutter assembly is easily secured and automatically set parallel to the wear plate with just one bolt.'

Mr Menold notes that the self-levelling feature also allows the system to accommodate non-perpendicular die stubs and worn plates.

For additional ease of maintenance, the self-adjusting die/knife cutter system is rated for wash-down and utilises high temperature, sealed bearings for longer life. The single cutting edge of the blades also minimises the risk of injury to employees and personnel.

Visit the Extru-Tech website, HERE.
 

The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine Milling and Grain
which is published by Perendale Publishers Limited.


For additional daily news from milling around the world: global-milling.com

No comments:

Post a Comment