by
Amandus Kahl GmbH, Germany
The extruder OEE NG from Amandus Kahl GmbH & Co KG has set about capturing the market for the production of pet food and fish feed of the highest quality.
The German machine manufacturer Amandus Kahl has been manufacturing a new extruder for the production of fish feed and pet food since 2019. The extruder OEE 25 NG (New Generation) was introduced onto the market with a screw diameter of 250mm and a resulting capacity of up to 10t/h. The 2020 series will be expanded by two extruders with screw diameters of 200mm and 150mm for smaller production volumes.
The new equipment and technology level of the Kahl Extruder OEE NG
After more than 20 years of experience with extrusion machines, customers now receive a completely new extruder to meet the growing demands in the production of fish feed and pet food. During the design phase, the focus was on producing a user-friendly machine with new performance standards.
A double-jointed connection enables a fast tool and knife change. The design was also a focal point - the extruder OEE NG is manufactured with a frame-mounted touch screen to control all relevant operating data, settings and options even during operation. The machine also features the proven Kahl stop bolt technology for successful mixing and venting in the first cylinder section. Special process zones for compaction, cooking and kneading ensure high flexibility and a wide range of adjustment options. The Kahl extruder can also be ideally adapted to changing formulae.
Fine control measures, such as the possibility of adjusting the screw speed, adding steam or water to the extruder barrel or individually adjustable heating and cooling jackets have also been taken into account in the design. A comparison of the screw diameters of both Kahl extruders clearly shows an increase in throughput: Thus, a capacity range of 10t/h is achieved in large industrial applications.
Read more HERE.
The extruder OEE NG from Amandus Kahl GmbH & Co KG has set about capturing the market for the production of pet food and fish feed of the highest quality.
The German machine manufacturer Amandus Kahl has been manufacturing a new extruder for the production of fish feed and pet food since 2019. The extruder OEE 25 NG (New Generation) was introduced onto the market with a screw diameter of 250mm and a resulting capacity of up to 10t/h. The 2020 series will be expanded by two extruders with screw diameters of 200mm and 150mm for smaller production volumes.
After more than 20 years of experience with extrusion machines, customers now receive a completely new extruder to meet the growing demands in the production of fish feed and pet food. During the design phase, the focus was on producing a user-friendly machine with new performance standards.
A double-jointed connection enables a fast tool and knife change. The design was also a focal point - the extruder OEE NG is manufactured with a frame-mounted touch screen to control all relevant operating data, settings and options even during operation. The machine also features the proven Kahl stop bolt technology for successful mixing and venting in the first cylinder section. Special process zones for compaction, cooking and kneading ensure high flexibility and a wide range of adjustment options. The Kahl extruder can also be ideally adapted to changing formulae.
Fine control measures, such as the possibility of adjusting the screw speed, adding steam or water to the extruder barrel or individually adjustable heating and cooling jackets have also been taken into account in the design. A comparison of the screw diameters of both Kahl extruders clearly shows an increase in throughput: Thus, a capacity range of 10t/h is achieved in large industrial applications.
Read more HERE.
The Global Miller
This blog is maintained by The Global Miller staff and is supported by the magazine Milling and Grain
which is published by Perendale Publishers Limited.
For additional daily news from milling around the world: global-milling.com
No comments:
Post a Comment